Should you be purchasing a stair with balusters in a contrasting material, like painted balusters on an oak stair, questions will likely arise with regards to the finishing of the stair. “Should my painter finish the balusters separately from the stair, then have the balusters installed when the stair is completed?
Below are a few points to consider with Stair Railing: Your painter will generally choose painting the balusters before installation. This enables them to be sprayed as opposed to brushed and eliminates lots of “cut-in” work.
Painting balusters separately also means that this stair installers must return to the site, take away the railings and install the balusters. There will be charge for this “second trip” towards the jobsite. You will need to make sure to schedule this “second trip” in coordination with all the completing the conclusion.
Leaving your balusters out for painting means that they are more likely to be lost or stolen during this time. You will end up in charge of balusters left in the jobsite. Once the painted balusters are finally installed, you will have additional “touch-up finishing required on the rail joints. Holes will have to be filled and stain and complete re-applied for the last finish.
Plan installing of your hardwood stair for after your drywall has been taped, sanded, and primed. The drywall process can cause damage to the stair. Drywall mud and paint overspray will make the stair finishing process very hard and might make desired results impossible to accomplish.
Most hardwoods are an open grain wood and once dirt gets embedded in open grain it is very difficult to remove, despite having sanding. This may possess a negative effect on the appearance and texture of the finish. Care should also be taken to safeguard the stair from dirt and mud.
Never Cover Hardwood Stairs With Plastic. Plastic will not allow airflow, trapping moisture underneath and resulting in the wood to expand and contract. This expansion and contraction causes the wood joints to open up and might result in the wood to crack.
The environmental conditions indoors are essential to the standard of the stair. Hardwood lumber has become dried through a very controlled process for an industry standard moisture content of 6 – 8%. This matches the moisture content vcbxbf the average home and allows the wood to remain stable under normal conditions.
In cold climates, when a property is heated to a high temperature in the wintertime, air can become very dry, creating the wood to shrink. This shrinkage can make cracks visible in the wood and joints may begin to start up. Subjecting a stair to high amounts of heat is similar to putting it in an oven and will accelerate the deterioration of the stair.
All hardwoods has to be sealed on every side to retard movement and protect from exposure to elements and damage. It is recommended to seal wood immediately.